216 4001055180 E 06.21 USA / GB
Upper boom
Remove/Re-install input compensation cylinder
MS0144
4 - You will need
• Standard tool kit
• Mallet
• Pin punch diameter 30 mm / 1,18 in
• Tray
• Circlips pliers
• 1 strap, length 3 m / 9 ft, capacity 1000 kg / 2,205 lbs
• Handling device
• Receiver compensation cylinder
• Seal pouch
• Grease for pins
• ORFS plug kit : 2505001600
• Hydraulic oil
• Place barriers around the perimeter
of the work area
Major component
masses
• Compensation cylinder : 30 kg / 67 lbs 2
To Next Page
Loading...
