Need help?Do you have a question about the Haulotte HA41PX-NT and is the answer not in the manual?
General| Brand | Haulotte |
|---|---|
| Model | HA41PX-NT |
| Category | Boom Lifts |
| Language | English |
Introduction to the operator's manual and HAULOTTE products.
Obligations of the owner regarding machine operation and maintenance.
Responsibilities of the employer concerning operator authorization and training.
Qualifications and duties of the trainer for operator training.
Duties of the operator for safe machine use, inspection, and reporting.
General safety instructions covering various hazards like misuse, falling, and electrocution.
Contact information for product safety department inquiries.
Procedure for reporting incidents involving HAULOTTE products.
Information on product modifications, safety bulletins, and specifications.
Guidelines for safe and proper use of the aerial work platform.
Explanation of hazard symbols and severity levels on machine decals.
Explanation of safety symbols and color coding used in the manual.
Defines the meaning of different hazard severity levels (Danger, Warning, Caution, Notice).
Details on model regulations and configurations for different markets.
Diagram showing the location of main machine components with numerical markings.
Overview of the ground control box layout and its components.
Explanation of LED indicators on the ground control panel for diagnostics.
Overview of the platform control box layout and its controls.
Explanation of LED indicators on the platform control panel for diagnostics.
Layout and controls for the axle extension operation.
Key technical data and specifications for HA32PX and HA41PX-NT models.
Graphical representation of the machine's operational range and reach limits.
Location of decals and markings for CE standard (HA32PX, HA41PX-NT).
Location of decals and markings for AS standard (HA32PX, HA41PX-NT).
Location of decals for Russia and Ukraine versions (HA32PX, HA41PX-NT).
Location of decals for ANSI and CSA standards (HA100JRT, HA130JRT-NT).
Responsibilities for ensuring machine fitness for work and adherence to local regulations.
Considerations for safe operation, including site traffic, ground conditions, and hazards.
Procedures for daily inspection, including visual checks and functional tests.
Checks for safety systems like E-stop buttons, activation controls, and fault detectors.
Procedure to test the functionality of E-stop buttons on all control boxes.
Ensuring the enable switch system is active for all machine movements.
Understanding the on-board fault detection system and error codes.
Testing the functionality of LEDs on control panels for faults and system status.
Testing the audible alerts for various machine conditions.
Conditions under which the engine automatically shuts down for safety.
Checking the overload sensing system and its alerts.
Inspection of the oscillating axle mechanism for leaks and proper function.
Testing the slope warning device that alerts when operating on an unauthorized slope.
Procedures to check the automatic speed reduction when the machine is elevated.
Explanation of the radius limitation system and its indicators for HA41PX-NT/HA130JRT-NT.
Specific checks for the boom control system on HA41PX-NT/HA130JRT-NT models.
Overview of machine operation, control boxes, and safety protocols.
Step-by-step guide for operating the machine from the ground control box.
Procedures for starting and stopping the machine from the ground control box.
Operation of boom, arm, jib, and turntable controls from the ground box.
Operation of beacon light and platform leveling from the ground control box.
Procedures for starting and operating the machine from the platform control box.
Operation of boom, arm, jib, and turntable controls from the platform box.
Operation of horn and differential lock from the platform control box.
Preparation and procedure for axle extension and retraction operations.
Step-by-step guide for extending the rear axle using levers E1 and E2.
Step-by-step guide for extending the front axle using levers E3 and E4.
Step-by-step guide for retracting the front axle using levers E3 and E4.
Step-by-step guide for retracting the rear axle using levers E1 and E2.
Procedure to check if the link piece is in the correct position before maneuvers.
Explanation of the radius limitation system and its indicators for HA41PX-NT/HA130JRT-NT.
Procedures for engine power failure and rescuing operators.
Procedures for putting the machine in transport position and securing it.
Procedures for towing a broken-down machine, including disengaging drive hubs.
Guidelines for storing the machine safely and properly.
Procedures and safety precautions for lifting the machine.
Advice on operating the machine in cold weather conditions.
Diagrams illustrating machine dimensions in stowed/transport and access positions.
Table listing the approximate masses of major machine components.
Specifications for noise emissions and vibration levels according to EU directives.
Technical specifications and maintenance procedures for wheels and tires.
Information about optional equipment and their operation.
Description and safety precautions for the Activ' Shield Bar system.
Importance of safety, regular maintenance, and inspections for equipment longevity.
Information on necessary inspections and maintenance for safe operation and service life.
Overview of the general inspection program, including intervals and responsibilities.
Detailed procedure for daily visual and functional inspections by the operator.
Requirements for thorough inspections conducted annually or upon resale.
Evaluation of structural components by a Haulotte Service technician.
Inspection of machine integrity after 10 years of service and subsequent 5-year intervals.
Guidelines for repairs, modifications, and service bulletins.
Information on after-sales service and manufacturer's warranty conditions.
Contact details for HAULOTTE subsidiaries worldwide.
To Next Page
