Seite | Page 103
ATRIUM
®
HS 330 – Rehau Geneo | 500656
Technische Daten Magnetschalter, Schema C
Kontakt
A/Schließer
Gehäusematerial Magnetschalter
Zinkdruckguss
Material Magnetschaltergehäuse
Kunststoff
Farben
Silber, grau
Kabel
LIYY 4 x 0,14 mm² x 6 m
Kontaktbelastung max.
10 Watt
Schaltspannung max.
100 V DC
Schaltgleichstrom max.
0,5 A
Temperaturbereich
bei festverlegtem Kabel
-25 °C bis +70 °C
Temperaturbereich bei
bewegtem Kabel
-5 °C bis +50 °C
Schutzart nach DIN 40050
IP 67
Lebensdauer
1.000.000 Schaltzyklen
VdS Zulassung
G 118502 VdS C
Klasse B
Umweltklasse III
EN 50131-2-6
EN-ST-000252
EN-Grad 2
Umweltklasse III a
Die technischen Daten des Magnetschalters dürfen
nicht überschritten werden.
Contact
A/closer
Housing material magnetic
switch
Zinc diecasting
Material magent switch housing
PVC
Colours
silver, grey
Cable
LIYY 4 x 0.14 mm² x 6 m
Contact load max.
10 Watt
Switching voltage max.
100 V DC
Switching DC max.
0.5 A
Range of temperature
in case of fixed cable
-25 °C till +70 °C
Range of temperature
in case of moved cable
-5 °C till +50 °C
Protection class
acc. to DIN 40050
IP 67
Lifetime
1.000.000 cycles of
operation
VdS permission
G 118502 VdS C
Class B
Environment class III
EN 50131-2-6
EN-ST-000252
EN-level 2
Environment class III a
The technical specifications of the magnetic switch must
not be exceeded.
Technical data magnetic switch, scheme C
Verschlusskontrolle, Schema C | Locking control, scheme C
Produktbeschreibung
Product description
Produktbeschreibung
Verschlusskontrolle zur Überwachung des verschlossenen
Zustandes des Fensterelements mit Weiterleitung über einen
potentialfreien Kontakt zu einer bauseitigen Auswerteinheit.
Geeignet zur Aufschaltung an eine Alarmanlage oder
eine Gebäudeautomation. Beachten Sie die technischen Daten.
• Magnetkontakt zur Verschlussüberwachung
• Geeignet für Fensterelemente HAUTAU ATRIUM
®
HS
in Schema C Ausführung
• VdS Zulassung Klasse B
• Integrierte Sabotageleitung
Allgemein: Vermeiden Sie, den Magneten in der Nähe von ferro-
magnetischen Werkstoffen zu montieren. Anderenfalls sind die
Ansprechwerte gesondert zu ermitteln.
Product description
Locking control for monitoring the locked status of the window
element including transmission to an on-site evaluation unit via a
potential-free contact.
Suitable for integration into an alarm system or a building
automation system. Observe the technical specifications.
• Magnetic contact for locking control
• Can be combined with window elements
HAUTAU ATRIUM
®
HS with scheme C design
• VdS certification, class B
• Integrated sabotage line
General: Avoided to mount the magnet near ferro-
magnetic materials. Otherwise the values for response should be
determined separately.