What to do if HAUTURE Laboratory Equipment items are not dry after drying cycle?
If items are not dry after the drying cycle, it could be because water is collecting on recessed or indented areas. Ensure parts are placed upside down to prevent water accumulation. Alternatively, the selected drying cycle may not be long enough; try selecting a longer drying time.
How to start HAUTURE WX-968E if it will not start?
If the equipment won't start, first ensure it is securely plugged into the power outlet. Then, verify that the appliance is turned on by pressing the “On/Off” button before choosing a function.
General| Brand | HAUTURE |
|---|---|
| Model | WX-968E |
| Category | Laboratory Equipment |
| Language | English |
Essential safety guidelines to prevent fire, shock, and injury during appliance use.
Steps for cleaning, positioning, adding water, and loading bottles and accessories.
Instructions for plugging in the device and selecting the desired function.
Details on using the Auto mode, including sterilization, drying, and storage cycles.
Instructions for the Sterilize function, including cycle completion and standby state.
Information on the Dry mode, including time adjustment and storage mode entry.
How to use the Storage mode, including time adjustment and automatic shutdown.
Guide to setting a custom time for sterilization or drying functions.
Detailed steps for cleaning the sterilizer, emphasizing safety and material care.
Recommended procedure for descaling the sterilizer using citric acid every four weeks.
Contact information for support and instructions for registering your 12-month warranty.
To Next Page