How to use the three-point seat belt
1. Grasp the hasp and pull the seat belt out of
the retractor, making sure that you do not
twist the seat belt. If the seat belt cannot be
pulled out from the retractor, the seat belt
should be pulled hard and then released, to
cause the seat belt to be rewound, then it will
be possible to pull the seat belt smoothly
from the retractor.
2. Insert the hasp into the buckle and make sure
you hear a click.
4FC5554DD762
3. Pull the shoulder belt upwards, and adjust
the waist belt to ensure a snug fit. This will
reduce the possibility of injury to the pelvis
in a collision.
4. Adjust the shoulder belt so it fits snugly over
the front of the chest and across the middle
of the shoulder. By doing so, the force of any
collision will be distributed across the
strongest part of the upper body.
5. To retract the seat belt, press down on the
release button on the top of the buckle. Once
released from the buckle, hold on to the hasp
until the seat belt is completely rewound to
prevent it from hitting other passengers or
objects close by.
To Next Page
Loading...
