Vehicle equipment
Please note that this manual contains all
the standard equipment, country-specific
equipment and special equipment for this
model series. Thus, some equipment or
features described in this manual may not
be installed onto your vehicle or are only
available in some markets. For further
configuration information, please refer to
relevant sales information or consult with your
distrib utor s ellin g the v ehicle to yo u.
About the system
The vehicle anti-theft system helps prevent
your vehicle and valuables from being stolen.
If someone tries to break into the vehicle, the
audible and visual alarm will be triggered.
⚠ Warning
Do not modify the vehicle anti-theft system.
System activation
1. After the door is successfully locked by the
button on the key, PEPS or the mechanical
key, the turn signal lamp flashes once, and
the vehicle enters the pre-alarm mode.
In pre-alarm mode, you can still operate the
vehicle without triggering the anti-theft
alarm.
2. After remaining in the pre-armed state for
about 15 seconds, the vehicle will automatically
enter the antitheft state and the vehicle
anti-theft system will be turned on.
⚠ Caution
To ensure that the vehicle anti-theft system is
turned on, check that all doors and tailgate are
fully closed before leaving the vehicle.
Notice
Once in the pre-armed state, the central locking
button will no longer function.
Conditions for triggering the alarm
The following behavior can trigger the alarm:
If the hood is opened.
If the doors or tailgate are opened by force.
Method for turning off the alarm
After the anti-theft alarm is triggered, the alarm
can be turned off in the following manner:
Change the power switch to ON mode.
Start the vehicle.
When the power switch is LOCK mode, unlock
the doors or tailgate using the button on the
key or PEPS.
System off
The vehicle doors and tailgate are un-locked via
the key button or the PEPS. The turn signal lamp
flashes twice and the anti-theft function of the
vehicle is off.
To Next Page
Loading...
