A/C setting interface
Notice
Depending on model configuration, the multimedia screen menus and their operation may vary,
please see actual vehicle for details.
DAD75945CE79
Tap A/C button to activate or deactivate the cooling mode. The corresponding indicator
illuminates, indicating that the cooling mode is activated. In this mode, the inside temperature
and humidity may be reduced.
Tap AUTO button to activate the automatic mode. In this mode, the air outlet mode and the air
volume can be automatically adjusted to reach the set temperature.
Notice
If the automatic air-out mode and air flow volume adjusted by the A/C system cannot meet your
demand, you can perform manual adjustment; in this case the system will exit the AUTO mode, and
the indicator will go out.
Touch the OFF button to turn off the A/C system.
Tap the face-blowing mode button , the feet and face-blowing mode button , the feet-
blowing mode button , or the feet-blowing and defroster mode button to select the
corresponding blowing mode.
Touch or slide the temperature display area on both sides of the air conditioning setting interface
to adjust the temperature.
Tap 【the sync】button to activate or deactivate the zoning control mode.
When the synchronizing lamp is on, it indicates that the zoning control mode has been turned
off. At this moment, the air-conditioning's temperature on the front passenger's side is consistent
with that on the driver's side, and when the air-conditioning's temperature on the driver's side is
adjusted, the air-conditioning's temperature on the front passenger's side will be adjusted
synchronously.
When the disconnection indicator light is extinguished, it indicates that the zoning control
mode has been turned on. At this time, when the air-conditioning's temperature on the driver's
side is adjusted, the air-conditioning's temperature on the front passenger's side will not be
affected.
To Next Page
Loading...
