Havener Enterprises BRADLEY MOWERS 36 User Manual (English)

Questions and Answers:

F
Frank BrownAug 5, 2025
How to fix Havener Enterprises Lawn Mower when engine does not start?
- P
  Phillip JohnsonAug 5, 2025
  If your Havener Enterprises Lawn Mower engine doesn't start, several factors could be at play. First, ensure the battery is fully charged. Then, verify that the parking brake lever is in the 'ON' position and the blade control lever is in the 'OFF' position. Also, check if the fuel tank is empty and refill it if necessary. Confirm that the fuel shut-off valve is open. Other potential issues include a safety interlock switch that needs adjustment, a loose or disconnected spark plug (connect the spark plug wire), a faulty spark plug (replace it), a dirty air filter (replace it), a clogged fuel filter (replace it), or bad fuel (drain and refill with fresh fuel).
T
Tracy SmithAug 10, 2025
Why Havener Enterprises Lawn Mower engine starts hard or loses power?
- S
  Stephanie AbbottAug 10, 2025
  If your Havener Enterprises Lawn Mower engine starts hard or loses power, the issue might stem from several causes. Start by draining and cleaning the fuel tank if there's dirt or water inside. A clogged or dirty fuel filter can also be the culprit, so replace it if needed. Similarly, replace a dirty air filter. Check the spark plug and replace it if it's faulty. Finally, ensure the oil level is correct and adjust if necessary.
J
Jason RiveraAug 15, 2025
What to do if Havener Enterprises BRADLEY MOWERS 36 engine overheats?
- D
  Dale FischerAug 16, 2025
  If your Havener Enterprises Lawn Mower engine overheats, several factors could be contributing. Begin by cleaning and replacing the fuel line if it's dirty. Ensure the grass screen is clean. Check and adjust the oil level if it's incorrect. Also, make sure the air filter is clean and adjust if needed. Finally, consider replacing the spark plug if it's faulty.
D
Donald SmithAug 20, 2025
How to fix Havener Enterprises BRADLEY MOWERS 36 Lawn Mower rough or uneven cut?
- R
  Richard SerranoAug 20, 2025
  If your Havener Enterprises Lawn Mower provides a rough or uneven cut, several factors could be responsible. Start by checking and adjusting the tire pressure to ensure it's equal across all tires. Inspect the spacer configuration on the blades or front casters and adjust if they are unequal. Reduce your mowing speed if it's too fast for the conditions. Check the blades for any bending and replace if necessary. Sharpen or replace dull blades. Clean any excessive build-up underneath the mowing deck. Finally, ensure the blades are installed in the correct direction.