44
2-8-3 DHCP Server
This wireless range extender is capable of acting as a DHCP server for
your network, but it’s disabled by default. If you want to activate this
function, please click ‘System Utility’ sub-tab and the following message
will be displayed:
Here are descriptions of every setup item:
Default Gateway
IP
Please input the IP address of default gateway of
your network here.
Domain Name
Server IP
Please input the IP address of domain name server
(DNS) here.
Start IP Please input the start IP address of the IP range.
End IP Please input the end IP address of the IP range.
Domain Name If you wish, you can also optionally input the
domain name for your network. This is optional.
Lease Time Please choose a lease time (the duration that every
computer can keep a specific IP address) of every
IP address assigned by this range extender from
dropdown menu.
NOTE: Please remember to select ‘Enable’ in ‘DHCP Server’
option as described in last Section or all DHCP-related fields will
be grayed out, and you will not be able to input any DHCP
arameter.
To Next Page
Loading...
Need help?
General
