Hawksmoor TOOLSTATION M1L-5ET-200 User Manual (English)

Questions and Answers:

M
Michelle SpencerAug 6, 2025
How to fix a Hawksmoor TOOLSTATION M1L-5ET-200 Pole Saw that won't start?
- A
  andrew48Aug 7, 2025
  If your Hawksmoor Pole Saw isn't starting, there are several potential causes. First, ensure that the pole saw is properly connected to a power supply. If it is, the power cord or plug might be defective and should be checked by a specialist electrician. Finally, another electrical defect to the product might be the cause, in that case you should have it checked by a specialist electrician.
D
davisalexisAug 13, 2025
Why is my Hawksmoor Pole Saw cutting poorly?
- S
  swalkerAug 14, 2025
  If your Hawksmoor Pole Saw's cutting performance is unsatisfactory, it could be due to a couple of reasons. The saw chain might not be tensioned properly, so ensure you tension it correctly. Alternatively, the saw chain might be dull or damaged, in which case you should sharpen or replace it.
K
Kelli WongAug 21, 2025
What to do if Hawksmoor TOOLSTATION M1L-5ET-200 doesn't reach full power?
- D
  Dale OwensAug 22, 2025
  If your Hawksmoor Pole Saw isn't reaching full power, consider these possible causes: the extension cord might not be suitable for operating the product, so use a proper extension cord. Also, the power source (like a generator) might have too low voltage, so connect to another power source. Finally, check if the air vents are blocked and clean them if necessary.
G
Gloria EstradaAug 28, 2025
Why is my Hawksmoor Pole Saw vibrating excessively?
- H
  hayesangelaAug 28, 2025
  Excessive vibration or noise in your Hawksmoor Pole Saw can be attributed to a couple of factors. It's possible that the saw chain is dull or damaged, so you should sharpen or replace it. Another cause could be that bolts or nuts are loose; in this case, tighten them.

Hawksmoor TOOLSTATION M1L-5ET-200 Specifications

General

Brand	Hawksmoor
Model	TOOLSTATION M1L-5ET-200
Category	Pole Saw
Language	English

Summary

What's in the Box

Specification

Explanations and Symbols, Cautions and Warnings

Safety Symbols and Explanations

Explains common safety symbols, cautions, and warnings found in the manual.

Important Safety Warnings

General Power Tool Safety Warnings

Covers work area, electrical, and personal safety precautions for power tool operation.

Personal Safety and Protective Equipment

Emphasizes alertness, common sense, and the use of appropriate protective equipment.

Safe Operation and Maintenance Practices

Instructions on proper usage, avoiding force, and basic maintenance for safe operation.

Service and Specific Pruner Safety

Guidance on professional servicing, replacement parts, and specific safety for pole saw use.

Pole Saw Trimming Precautions

Safety guidelines for trimming with the pole saw, including positioning and avoiding unstable surfaces.

Product Description and Identifications

Parts Identification and Description

Identifies and describes all components and parts of the pole saw.

Assembly and Operating Instructions

Intended Use and Saw Chain Assembly

Defines the product's intended purpose and details the initial steps for assembling the saw chain.

Chain Tensioning and Sprocket Cover Fitting

Instructions on fitting the sprocket cover and adjusting the saw chain tension correctly.

Chain Oil and Lubrication

Guidance on adding chain oil, maintaining lubrication, and preventing damage from dry running.

Component Assembly and Pole Extension

Steps for assembling components and adjusting the telescopic pole length.

Saw Chain Tension Check and Maintenance

Detailed steps for checking and maintaining proper saw chain tension.

Switching On/Off and Adjusting Pole/Head

How to operate the switch, adjust the power head angle, and set pole length.

Cutting with the Chain Saw

Instructions on grip, footing, starting cuts, and safe cutting techniques.

Safe Operation and Shoulder Strap Use

Advice on removing the saw from cuts, checking lubrication, and correctly attaching the shoulder strap.

Shoulder Strap Adjustment

Details on adjusting the seat retainer for optimal comfort and control with the shoulder strap.

Care and Cleaning

Cleaning the Saw Body and Guide Bar

Procedures for cleaning the saw body and inspecting the guide bar for wear.

Guide Bar Maintenance and Chain Sharpening Prep

Steps for maintaining the guide bar and listing items needed for chain sharpening.

Sharpening Saw Chain Cutters

Detailed instructions on filing saw chain cutters to the correct angle for optimal performance.

Filing Cutter Depth Gauges

Guide on resetting and filing cutter depth gauges for proper chain function.

Replacing Saw Chain and Storage

Instructions for replacing the chain and proper procedures for storing the pole saw.

Trouble Shooting

Common Problems and Solutions

Lists common issues like failure to start or poor performance with their respective causes and remedies.

Declaration of Conformity / Performance

Product Compliance and Standards

Declares conformity with relevant regulations and lists applicable safety and performance standards.

Environmental Information

Proper Waste Disposal and Recycling

Guides users on responsible disposal of electrical equipment to protect the environment.

Guarantee

Guarantee Terms and Conditions

Outlines the terms, conditions, and limitations of the product's guarantee.

Customer Support

Contact and Support Information

Provides contact details for customer support, including website, phone, and email.

Hawksmoor TOOLSTATION M1L-5ET-200 User Manual

Table of Contents