Hayter Heritage RS 17/102H User Manual (English)

Questions and Answers:

J
Julie SilvaJul 28, 2025
Why my Hayter Lawn Mower engine does not start?
- D
  David Hamilton Jr.Jul 29, 2025
  If your Hayter Lawn Mower engine isn't starting, several factors could be at play. First, ensure you have enough fuel in the tank, and that the tank venting is working correctly. Also, check the fuel filter. If the fuel is old or contaminated, replace it with fresh fuel and have the carburettor cleaned by a workshop. A contaminated air filter can also prevent starting, so clean it according to the engine operating instructions. Finally, check the spark plug for cleanliness and consider replacing it. Inspect the ignition cable, and if problems persist, have the ignition unit checked by an authorised service agent. If the engine is flooded from repeated start attempts, unscrew and dry off the spark plug.
C
Cody ForbesAug 1, 2025
What to do if starter does not react on Hayter Heritage RS 17/102H Lawn Mower?
- J
  Jody WhiteheadAug 2, 2025
  If the starter on your Hayter Lawn Mower isn't reacting, there are several things to check. First, ensure the starter battery isn't empty or weak by charging it. Make sure the safety switch on the driver's seat is functioning by sitting correctly. Ensure the safety switch on the brake pedal is working by pressing the brake pedal right down. Confirm the mowing appliance is switched off. Finally, check the fuse (5A) on the (+) cable of the starter battery.
J
John PerezAug 5, 2025
Why Hayter Heritage RS 17/102H Lawn Mower engine performance drops?
- R
  Renee Welch MDAug 6, 2025
  If your Hayter Lawn Mower's engine performance is declining, it could be due to several reasons. If the grass is too long or wet, raise the cutting height and briefly move backwards to create airflow. A blocked discharge channel or mowing deck can also cause this, so clean them after switching off the engine and disconnecting the spark plug. Check and clean the air filter, referring to the engine information. If the carburettor setting is incorrect, have it checked by an authorised service agent. A severely worn blade can also reduce performance, so replace it with an original replacement blade through an authorised service agent. Lastly, reducing the mower's speed may help.
M
marcuswongAug 10, 2025
What to do if grass box not filling on Hayter Heritage RS 17/102H Lawn Mower?
- C
  catherine29Aug 10, 2025
  If the grass box on your Hayter Lawn Mower isn't filling properly, several factors could be the cause. First, check if the mower setting is too low and adjust the cutting height accordingly. If the grass is damp, wait for it to dry. A badly worn blade can also affect filling, so replace it with an original replacement blade through an authorised service agent. If the grass is too long, cut the lawn twice, first at the maximum cutting height, then at the required height. Also, check for a blocked fabric sack or discharge channel and clean them.
A
Adrian BentleyAug 15, 2025
How to fix poor cut on Hayter Heritage RS 17/102H?
- K
  Kari HardyAug 15, 2025
  If your Hayter Lawn Mower is providing a poor cut, several factors could be responsible. A worn or blunt blade is a common cause; replace or regrind the blade, and balance reground blades, using only original replacement blades from an authorised service agent. Ensure the cutting height is correct and adjust if necessary. The engine speed might be too low, so set it to maximum. If the speed is too high, reduce it. Finally, check that the tyre pressure is correct on all wheels, referring to the technical data for the correct pressure.
T
Tina WilliamsAug 19, 2025
Why level display does not react on Hayter Heritage RS 17/102H Lawn Mower?
- S
  Sean StewartAug 19, 2025
  If the level display on your Hayter Lawn Mower isn't reacting, it's likely due to cuttings on the level display lever. Remove these cuttings and check the lever's movement.
K
karenjordanAug 23, 2025
What to do if Hayter Heritage RS 17/102H tractor does not move?
- S
  Savannah MartinAug 23, 2025
  If your Hayter Lawn Mower tractor isn't moving and has a hydrostat drive, the issue may be due to no traction. Move the bypass lever downwards to the operating position. See the section on driving without traction for more details.