6. Functions won’t turn on when the "ON" button is pressed: (1) If the "SYSTEM OFF"
button (PS versions only) has been pushed then all functions are disabled. Press the "System
Off" button again to resume normal operation. (2) If the Pro Logic/Aqua Logic system is in
service mode, then functions can only be turned on at the main unit display/keypad. Press
the "SERVICE" button once (or twice) until normal operation is restored. (3) The filter pump
is turned off for a short period of time while the valves are rotating. Normal operation will
resume automatically when the valve(s) have finished their rotation.
5
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
To Next Page
Loading...
