Installation and Operation Instructions
CS201 Electronic Siren
The Hazard Systems CS201 emergency vehicle siren is available in both 12-Volt and 24-
Volt versions and can provide up to 200-Watts of siren output power. Two amplifi ers can
be linked together for up to 400-Watts of output. A tough aluminium casing with specially
designed cooling fi ns maximises thermal performance.
The control head features a ‘soft-touch’ rubberised housing with an integrated PA microphone
and easy 3-button operation. Control head installation is simplifi ed by use of a swivel-
mounting cradle.
`
WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result
in property damage, serious bodily/personal injury, and/or death to you and those you are
seeking to protect!
SPECIFICATIONS
Voltage 12V 24V
Input Voltage Range (VDC) 10-15 20-30
Output ¹ (nominal 33Vrms)
1 Speaker
(100W)
2 Speakers
(200W)
1 Speaker
(100W)
2 Speakers
(200W)
Current Draw
Max ¹ 9A 16A 5A 9A
Standby (Typ.) 10mA
Amplifi er Dimensions (H x W x D mm) 59 x 159 x 192
Amplifi er Weight 1700 g
Controller Dimensions (H x W x D mm) 115 x 55 x 25
Controller Weight 220 g
Ambient Operating
Temperature
-10 to +40 °C
¹ Using Hazard Systems 11 Ohm speaker(s) at 13.6Vdc or 27.2Vdc
To Next Page
General