What to do if HCI Fitness Equipment has no power?
If your HCI Fitness Equipment has no power, ensure it is correctly inserted into the outlet and the main body connector. Also, check that the power light is illuminated.
Why HCI Fitness Equipment lower limb cranks do not rotate?
If the lower limb cranks on your HCI Fitness Equipment aren't rotating, ensure that leg exercise is selected in Passive Mode. Choose leg exercise in Passive Mode.
Why HCI Fitness Equipment upper limb cranks do not rotate?
If the upper limb cranks on your HCI Fitness Equipment aren't rotating, make sure arm exercise is selected in Passive Mode. Choose arm exercise in Passive Mode.
What to do if HCI Fitness Equipment has pedal position error?
If your HCI Fitness Equipment shows a pedal position error, turn the power off and then on again to reset the system.
How to fix no spasm detection on HCI Fitness Equipment?
To fix no spasm detection on your HCI Fitness Equipment, confirm that the exercise is in Passive Mode. Then, choose the Heavy spasm control setting within Passive Mode.
General| Brand | HCI Fitness |
|---|---|
| Model | OmniTrainer |
| Category | Fitness Equipment |
| Language | English |
To Next Page