Using Flash Memory Cards
Flash Memory is a memory storage media. It is used by most digital camera, moreover it can replace the
traditional floppy disk. Flash memory card is built with different form factor and brand name. Their size is
smaller than PCMCIA card. This computer supports most of the flash memory card, including Memory
Stick(MS-Pro), Multi Media Card, and Secure Digital(MS/MS PRO/MMC/SD)
Note:
For a single moment, only one card can be inserted into the 4 in 1 card slot
Inserting Flash Memory Card
To insert a flash memory card into the slot is similar to ExpressCard. You only need to pay more attention
whenever insert the flash memory card into the slot with the correct side.
Only one correct side can be accepted for the 4 in 1 card slots. If you cannot insert the card into the 4 in 1
slot or you had inserted the card but it is not recognized by the computer, please remove the card and turn
the card upside down and insert it again. To prevent the damage made both on card and the slot, never
forced an entry into the slot with incorrect side.
Removing Flash Memory Card
1. Right click on the memory card drive and select eject.
2. You should only pull out the card by finger, there is no release button for flash memory slot.
User's Guide
4-19
Using the Notebook PC
To Next Page
Loading...
