Need help?Do you have a question about the HD AUDIO SYSTEM DMX512 and is the answer not in the manual?
General| DMX Channels | 512 |
|---|---|
| Control Protocol | DMX512 |
| Weight | 1.2kg |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage | 12V DC |
Configure the device to operate as a master unit for synchronization.
Set the DMX512 address for controlling the light via DMX.
Choose between 1-channel or 4-channel DMX modes for operation.
Set the device to operate as a slave unit in a synchronized system.
Enable or disable sound-activated operation for the light effects.
Manage the display of information on the device's LED screen.
Reverse the display orientation or set opposite directions for movement.
Perform a reset operation, either to default settings or no reset.
Control individual light channels and motor speed manually.
To Next Page