To Previous Page

4.Portable

5.Comply with CE

2c.Where to use

1.For detecting environmental electromagnetic radiation:Indoors,

office,computer station room industrial control room, electricity

wire, high voltage wire, monitor and so on which are the origin of

radiation

2.For detecting home electronics:cell phone, PC, TV Set Copy

machine,Fax machine, AC, refregrator and so on

2d.Specifications

1.Size:132mm(L)x69mm(W)x29mm(H)

2.Weight:190g

3.Screen:LCD

4.Requency range:50Hz~2000MHz

5.Reacting time: 0.4S

6.Voltage:9V

7.Battery model:6F22 9V

8.Accessory:User manual, warranty card, battery

2e. How to detect

1.Switch on the device

2.Close to the object slowly until contact with it,the closer the

distance is the stronger the power of lectromagnetic radiation is.

Remark:Don’t clost to the object with high voltage

3.Change the angle during detecting until get the maximum data

4.When the object is power off, the reading will be 0 unless there are

other disturbing

2f. About battery

1.When the reading of the device is too low or no alarm that means

low power, please change battery

2.Please remove the battery when finish using it

Questions and Answers:

Need help?

Do you have a question about the HDE DT 1130 and is the answer not in the manual?

HDE DT 1130 Specifications

General