22
the helmet‘s surface. If so, push on each side until the edges are rmly
axed. TĀG is designed to accommodate some exing, so don‘t worry
about damaging it. If you’re having diculty securing the edges, place
pressure on them overnight. The adhesive will initially have 20% strength
and build to 100% over 24 hours. Minor gaps at the edges shouldn’t have
any consequences to the mounting strength or the sound quality.
Event Status Light feedback Acoustic feedback
Press Button once (short) Product on GREEN Ascending tones
Press Button long (2 sec.) Product o O Descending tones
Bluetooth® not connected Pairing Mode BLUE ashing -
Press Button once short
while streaming
Pause GREEN
ashing
-
Battery low Battery low RED + GREEN 1x Alerting sound,
30min left
To Next Page
Loading...