MM513-100, MM513-600, MM513-120EU, MMBPT-190, MMBRU-007, MMLSE-
0029, MMTRI-0022A, MMSBT-170
Compact, handheld, battery operated unit that tests the integrity (e.g., pinholes, cracks, or
defects) of the insulation of electrosurgical instruments to prevent tissue burns of
laparoscopic and bipolar electrosurgical instruments.
● Insulation Tester- MM513-100
● Bi-Polar Fixture and Black Connector—MMBPT-190
● Training CD
● Quick Operation Guide (manual)
● On and off switch
● Lightweight portable unit
● Measurements:
○ Weight: 0.672 pounds (305 g)
○ Voltage: 0- to 5 kV fully adjustable
○ Resolution: 10 V
● Current output: < 0.1 mA (0.0001 A) at probe.
● Short circuit: test current < 0.1 mA max.
● Power supply: 1800 mAh Li-Polymer Battery.
● Probes:
o Medical style brass wire eight (8) mm wide brush, trim length of two
(2) mm. (NOTE: Probe size/shape may vary depending on user
requirement)
o Reusable/interchangeable brush, ring, or Tri-Hole electrode
o Test stand—Saddle Block.
● System case
● Ground wire (green wire):
○ with alligator clip—six (6) feet
○ with clamp on one end—two (2) m.
● Power supply option: 5 V external rechargeable battery with adaptor.
● Lithium Polymer battery.
● Dimensions: 8.5- x 3.1- x 1.5 inches (215- x 78- x 38 mm)
● Ten (10)-hour operational time (up to 1000 instruments), two (2)- to 4-hour
recharging cycle.
● Simple operation, easy to read LED indicators.
● Maintains applied test voltage with constant current source.
● Full test current at low voltages.
● Limited output current for operational safety.
● Voltage up and down buttons
● LED displays alarm (audible and visual) and battery charge
● C-Style adapter wall charger
Brush Range Voltage
To Next Page
Need help?
General
