Heartland WaveReader Spin - Page 2

2
www.heartlandMicroPayments.com
The tools required for the installation process are as follows:
Required Tools
 #T-20 Pin-in-Star Torx Driver
(for many machines)
 Phillips Head Screwdriver
(medium) – magnetic tip is
helpful
 3/16” Drill Bit
 7/8” Stepper - Drill Bit
 Electric Drill – Heavy Duty
 Adhesive tape
 Scissors
 File (for de-burring 7/8” hole)
DOC-WR-SPIN-INST