To Next PageTo Next Page
Need help?Do you have a question about the Heatilator WS22-AU and is the answer not in the manual?
General| Brand | Heatilator |
|---|---|
| Model | WS22-AU |
| Category | Wood stove |
| Language | English |
Details about the appliance's certification and testing standards.
Provides data on heat output and energy efficiency ratings for the appliance.
Information on the type and specifications of the appliance's glass.
Lists materials that will not ignite and burn, relevant for installation clearances.
Lists materials that can ignite and burn, crucial for safe installation clearances.
Identifies and describes the main operating parts of the wood appliance.
Provides essential safety guidelines for operating the wood appliance safely.
Explains symptoms and actions to prevent over-firing the appliance.
Defines combustible and non-combustible materials for installation safety.
Guidelines for selecting and storing wood for optimal appliance performance.
Describes the stages of burning wood for efficient and clean operation.
Procedures and recommendations in the event of a chimney fire.
Details on how to use the burn rate air controls for optimal heat output.
Information on achieving maximum operating efficiency through burn rate settings.
Step-by-step instructions for building a fire in the appliance.
Crucial guidance on correct placement of baffle and blanket for optimal performance.
Information on choosing and using appropriate wood fuel for the appliance.
Guidelines for operating the optional blower for enhanced heat distribution.
Specifies required clear space around the appliance for fire safety.
Explains how to assess and minimize smoke opacity for cleaner burning.
Discusses negative pressure issues and how to mitigate them for proper draft.
Addresses common issues and provides solutions for operation and troubleshooting.
A quick guide outlining regular maintenance tasks and their frequency.
Detailed procedures for general maintenance, including chimney cleaning and ash disposal.
Step-by-step instructions for safely replacing the appliance's glass.
Guidance on how to replace worn or damaged firebricks in the firebox.
Instructions for assembling or replacing the door handle mechanism.
Procedures for removing and reinstalling the baffle for maintenance or repair.
Steps for replacing the snap disc, likely related to blower operation.
Instructions for replacing the tube channel assembly, a key internal component.
Key considerations for planning the safe and proper installation of the appliance.
Essential fire safety precautions for installation and initial operation.
Explains negative pressure and its impact on appliance performance and safety.
Lists the necessary tools and supplies for appliance installation.
Guidance on inspecting the appliance and its components for damage before installation.
Information on achieving proper draft for successful appliance venting.
A checklist for installers to ensure all installation steps are completed correctly.
Provides detailed physical dimensions of the appliance for installation planning.
Specifies requirements for hearth protection to prevent fire hazards.
Instructions for correctly installing the firebox, including clearances.
Minimum clearances required between the appliance and combustible materials.
Guidance on optimal placement of the appliance and chimney for performance.
Specifies the minimum required height for the flue system exit for proper draft.
Details the requirements for terminating the chimney system safely and effectively.
General instructions for installing various flue system components and shields.
Discusses the impact of chimney height on performance and recommendations.
Instructions for securely installing chimney components like connectors and pipes.
Explains how to measure and ensure proper draft for efficient burning.
Details on tested flue systems that comply with AS/NZS 2918:2001 standards.
Guidance for installing un-tested flue systems according to specific AS/NZS standards.
Instructions for installing an optional outside air kit for combustion.
Steps for installing the optional blower assembly onto the appliance.
Information on how to adjust the blower speed control for desired airflow.
A logbook to record all maintenance and service performed on the appliance.
A visual exploded view of the appliance showing all components for service.
A detailed list of available service parts with part numbers for ordering.
Lists available accessories that can be purchased for the appliance.
