Need help?Do you have a question about the HeatMat HC10 and is the answer not in the manual?
General| Brand | HeatMat |
|---|---|
| Model | HC10 |
| Category | Thermostat |
| Language | English |
Explains the primary functions of the hc10 thermostat for electric underfloor heating.
Crucial pre-installation steps, including drying time and authorized electrician requirement.
Details the initial automatic setup and operation of the thermostat upon first use or reset.
Describes the weekly programming feature for energy saving through temperature adjustments.
Explains the function and usage of different sensor types for temperature feedback.
Information about the internal battery that provides power backup during outages.
Step-by-step guide to setting the current time and day on the thermostat.
Instructions for configuring the thermostat to use the floor sensor for temperature control.
Instructions for configuring the thermostat to use the room sensor for temperature control.
Instructions for using both room and floor sensors, including temperature limits.
How to activate the night and day setback programming feature.
Overview of the default weekly time zones and temperature settings for setback programs.
Guide to modifying the start times for different program zones in the setback schedule.
Guide to modifying the temperature values for different program zones in the setback schedule.
Instructions on how to enable or disable specific time zones within the setback program.
Steps to disable a specific program-time zone from the night and day setback schedule.
Steps to enable a specific program-time zone within the night and day setback schedule.
How to adjust the maximum and minimum temperature limits when using combined sensors.
Procedure to switch the thermostat's operating mode from Quickstart to setback programming.
Procedure to switch the thermostat's operating mode from setback programming to Quickstart.
How to toggle the thermostat display between current and target temperatures.
Guidance on where to place and how to connect the floor sensor for optimal performance.
Recommendations for mounting the thermostat unit, avoiding heat sources and specific heights.
Information on choosing the correct flush-mounting box for different wall types.
Information on choosing the correct surface-mounting box for wall installation.
How to interpret the display indicators for floor sensor connection and error status.
Detailed technical specifications for the floor sensor, including type, dimensions, and operating range.
To Next Page