EasyManua.ls Logo

Heatrae Sadia HI-MAX INSTANT ID 5-60 User Manual

Heatrae Sadia HI-MAX INSTANT ID 5-60
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HI-MAX INSTANT Indirect HIU
Installation, operation and maintenance manual
HImax Instant

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Heatrae Sadia HI-MAX INSTANT ID 5-60 and is the answer not in the manual?

Heatrae Sadia HI-MAX INSTANT ID 5-60 Specifications

General IconGeneral
BrandHeatrae Sadia
ModelHI-MAX INSTANT ID 5-60
CategoryBoiler
LanguageEnglish

Summary

Safety

2.1 General safety warnings

Crucial warnings for safe operation and installation of the unit.

2.3 Specific safety instructions

Specific safety instructions for valves and system components.

Technical specifications

3.1 HI-MAX INSTANT ID technical data

Key technical specifications for ID 5-60 and ID 5-80 models.

3.2 HI-MAX INSTANT ID 5-60 performance data

DHW output performance data for the HI-MAX INSTANT ID 5-60.

3.3 HI-MAX INSTANT ID 5-80 performance data

DHW output performance data for the HI-MAX INSTANT ID 5-80.

3.4 HI-MAX INSTANT ID 5-60 and 5-80 heating performance data

Heating performance curves and data for both models.

3.7 Electrical diagrams

Wiring diagrams for heating and hot water control systems.

3.8 Pipework and Instrumentation (P & I) Diagram

Schematic showing pipework and instrumentation layout.

Description of the product

4.2 Operation principle

How the HIU generates domestic hot water and controls heating.

4.2.2 DHW Operation

Detailed process of domestic hot water generation.

4.2.3 Apartment Heating Operation

How the HIU controls the apartment heating system.

Before installation

5.1 Installation regulations

Mandatory regulations and standards for HIU installation.

Installation

6.2 Water connections

Details the various water connection types on the HIU.

6.7 Cold water supply connection

Instructions for connecting the cold water supply to the unit.

6.11 Electrical connections

Procedures for making all necessary electrical connections.

6.12 Filling the installation

Procedures for filling DHW and community heating systems.

6.12.1 Filling the DHW system

Step-by-step guide for filling the DHW system.

6.12.2 Filling the community heating system

Process for filling the community heating system.

Commissioning

7.2 Checklist before commissioning

Essential checklist of tasks before commissioning the unit.

7.3 Commissioning procedure

Detailed steps for commissioning the HIU.

7.3.1 Hot water mode.

Procedures for setting and verifying hot water mode.

7.3.2 Heating mode.

Procedures for setting and verifying heating mode.

7.3.2 Operational check.

How to perform operational checks after setup.

Operation

Maintenance

Troubleshooting

10.1 Fault finding

Comprehensive chart for identifying and resolving faults.

10.4 Fault codes

Detailed list of error codes, causes, and remedies.

Commissioning / product installation & service documentation

HEAT INTERFACE UNIT COMMISSIONING CHECKLIST

Checklist for proper installation and commissioning procedures.

14.1 Accessing the Installer Settings.

14.2 Navigating through the Installer Settings.

Guidance on navigating the installer settings menu.

14.3 Changing and storing a parameter setting.

How to modify and save parameter settings.

Related product manuals