D
David LevineAug 3, 2025
What to do if Heavy Duty Power Systems HDI 7000RWB Inverter generator cannot generate electricity?
- BBradley HicksAug 3, 2025
If your Heavy Duty Power Systems Inverter's generator isn't producing electricity or welding voltage, first ensure the master switch (NFB) is turned to the “ON” position. If that's not the problem, the carbon brush of the generator may be worn, leading to poor contact, so try exchanging the carbon brush. Also, check the socket contact and adjust the contact feet if necessary. Make sure the engine reaches its rated revolution. If the issue persists, the AVR automatic governor or the potentiometer of current regulation for electric welding might be damaged, requiring replacement.