Need help?Do you have a question about the Heco METAS XT 701 and is the answer not in the manual?
Essential guidance for connecting HECO Metas XT loudspeakers to audio systems, including cable recommendations.
Explains bi-wiring and bi-amping connections for HECO Metas XT speakers using their terminal panels.
Details optimal stereo placement for Metas XT 301, 501, and 701 models for harmonious sound.
Placement advice for 301/501/701 (front/rear), Center 31, and Sub 251A models.
Guides on connecting HECO speakers to an AV receiver with or without a subwoofer output.
Advice on preventing damage to HECO loudspeakers from improper use, overload, or distortion.
Presents technical data including configuration, power handling, impedance, and frequency response.
Details the duration, coverage, and conditions for HECO product warranty.
Lists items and conditions not covered by the HECO product warranty.
Instructions for filling out the warranty card for product registration.
General| Sensitivity | 92 dB |
|---|---|
| Power Handling | 200 W |
| Woofer | 2 x 170 mm |
| Type | 3-way |
| Impedance | 4 - 8 Ohms |
| Midrange | 1 x 170 mm |
| Tweeter | 25 mm |
| Recommended Amplifier Output | 30 - 200 W |
| Configuration | 3-Way |
To Next Page