HEIDENHAIN CNC PILOT 640 - Page 613

DIN/ISO Programming for the Y axis | Example program
6
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
613
N 79 UNIT ID"C_AXIS_ON"
[C axis ON]
N 81 M14
N 82 G110 C0
N 83 END_OF_UNIT
N 84 UNIT ID"G841_Y_MANT"
[Single surface in Y axis, latrl.]
N 86 T8
N 87 G197 S1200 G195 F0.25 M104
N 88 M8
N 89 G19
N 90 G110 C0
N 91 G0 Y0
N 92 G0 X74 Z10
N 93 G147 K2 I2
N 94 G841 ID"Surface" P5
[Mill a single surface]
N 95 G47 M9
N 96 G14 Q0 D1
N 97 G18
N 98 END_OF_UNIT
N 99 UNIT ID"G845_TAS_Y_MANT"
[ICP pocket mill, lateral surf. Y]
N 101 T10
N 102 G197 S1200 G195 F0.18 M104
N 103 G19
N 104 M8
N 105 G110 C0
N 106 G0 Y0
N 107 G0 X74 Z-40
N 108 G147 I2 K2
N 109 G845 ID"Slot 10 mm" Q0 H0
Mill a slot on single surface
N 110 G47 M9
N 111 G14 Q0 D1
N 112 G18
N 113 END_OF_UNIT
N 114 UNIT ID"G840_ENT_Y_MANT"
[G840 Deburring]
N 116 T12
N 117 G197 S800 G195 F0.12 M104
N 118 G19
N 119 M8
N 120 G110 C0
N 121 G0 Y0
N 122 G0 X74 Z-40
N 123 G147 I2 K2