TURN PLUS | Automatic working plan generation (AWG) submode
7
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
631
Machining sequence Drilling
Main mach.
operation
Anc. mach.
operation
Machining location
Design
Drilling
Contour analysis: Determining the Hole form
elements
Sequence – Drilling operations/drilling
combinations:
Centering / countersinking
Drilling
Countersinking / Drilling and countersinking
Reaming / Drilling with reaming
Tapping / Drilling with thread
Sequence – Location:
Centric
Front (also machines Y front)
Lateral surface (also machines Y surface)
– then the elements are machined according to
the sequence of geometrical definition
All
– All drilling/boring operations at all machining
locations
All Centric
Centric machining of all drilling/boring opera-
tions
All Front
All drilling/boring operations on the front face
All Lateral
All drilling/boring operations on the lateral
surface
Centering,
Drilling,
Countersinking,
Reaming, Thread
– Machining at all machining locations
Centering,
Drilling,
Countersinking,
Reaming, Thread
Centric
Centric machining on the face
Centering,
Drilling,
Countersinking,
Reaming, Thread
Front
Machining on the face
Centering,
Drilling,
Countersinking,
Reaming, Thread
Lateral
Machining on the lateral surface
To Next Page
Loading...
