TURN PLUS | Automatic working plan generation (AWG) submode
7
632
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Machining sequence milling
Main mach.
operation
Anc. mach.
operation
Machining location
Execution
milling
Contour analysis: Determining the milling
contours
Sequence – Milling operation:
Linear and circular slots
Open contours
Closed contours (pockets), single surfaces
and centric polygons
Sequence – Location:
Front (also machines Y front)
Lateral surface (also machines Y surface)
– then the elements are machined according to
the sequence of geometrical definition
All
– All milling operations at all machining locations
Area, Contour,
Slot milling,
Pocket
Front
All milling operations on the front face
Area, Contour,
Slot milling,
Pocket
Lateral
All milling operations on the lateral surface
Area, Contour,
Slot milling,
Pocket
– Milling at all machining locations
Area, Contour,
Slot milling,
Pocket
Front
Milling the end face
Area, Contour,
Slot milling,
Pocket
Lateral
Milling on the lateral surface
To Next Page
Loading...
