TURN PLUS | Automatic working plan generation (AWG) submode
7
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
633
Machining sequence Deburring
Main mach.
operation
Anc. mach.
operation
Machining location
Execution
Deburring
Contour analysis: Determining milling
contours with Deburring attribute
Sequence – Machining location:
Front (also machines Y front)
Lateral surface (also machines Y surface)
– then the elements are machined according to
the sequence of geometrical definition
All
– All milling operations at all machining locations
Contour, Slot
milling, Pocket
(*)
Front
Deburring of all milling operations on the front
face
Contour, Slot
milling, Pocket
(*)
Lateral
Deburring of all milling operations on the lateral
surface
Contour, Slot
milling, Pocket
(*)
– Deburr selected element at all machining
locations
Contour, Slot
milling, Pocket
(*)
Front
Deburr selected element on the face
Contour, Slot
milling, Pocket
(*)
Lateral
Deburr selected element on the lateral surface
*: Define the type of contour
To Next Page
Loading...
