HEIDENHAIN iTNC 530 HSCI - Saving and Loading a Recording

1000 HEIDENHAIN Technical Manual iTNC 530 HSCI
Saving and loading
a recording
You can display the signal last recorded for a channel again by selecting the
Saved signal.
With the SAVE SCREEN soft key in the Setup menu you can save the recorded
signals with all settings in a file on the hard disk. The file must have the
extension *.DTA. This file can
 be recalled with the PLC development software PLCdesign
 be read back into the control.
In order to read a *.DTA file back into the control:
 Press the RESTORE SCREEN soft key in the Setup menu.
 Enter the complete file name and path of the *.DTA file.
 Press the ENT key.
 Press the OSCI soft key to displays the signals from the *.DTA file.