HEIDENHAIN iTNC 530 HSCI - Commissioning; Tables for Power Modules, Supply Modules and Motors

1004 HEIDENHAIN Technical Manual iTNC 530 HSCI
6.14 Commissioning
6.14.1 Tables for power modules, supply modules and motors
In the machine parameter editor you select the installed motors, power
modules and supply modules.
 Call a list of power modules, motors or supply modules with the
corresponding soft key.
In the list of motors, the type of motor (synchronous, asynchronous, or
linear motor) and the operating mode are displayed in addition to the motor
designation.
Meaning of the soft keys:
Call a list of power modules.
Jump to the beginning of the list of power modules.
Jump to the end of the list of power modules.
Scroll one page forward in the list of power
modules.
Scroll one page backward in the list of power
modules.
Select a power module with the arrow keys and
transfer it with the corresponding
STORE MP2100.X soft key.
Open the table of power modules in write-protected
mode and jump to the selected power module.
Open the table of power modules in editing mode
and jump to the selected power module.
Return to the machine parameter editor.