July 2013 8.1 Display and operation 1283
8.1.28 Conversational language
The TNC is delivered with all NC-dialog human languages already loaded:
In MP7230.0 select the conversational language in which you wish to work.
If the NC dialog messages for the selected language are not on the hard disk,
the error message LANGUAGE LOAD ERROR appears. You can continue working
in the default language English.
You can write your own dialog messages and save them in several languages:
Save your dialog messages in permanently defined directories in the PLC
partition.
These directories are:
PLC:\LANGUAGE\ CHINESE\
CZECH\
DANISH\
DUTCH\
ENGLISH\
ESTONIA\ (option 41 – ID 530 184-01)
FINNISH\
FRENCH\
GERMAN\
HUNGARIA\
ITALIAN\
KOREAN\ (option 41 – ID 530 184-01)
LATVIAN\ (option 41 – ID 530 184-011)
LITHUANIAN\ (option 41 – ID 530 184-01)
NORWEGIAN\ (option 41 – ID 530 184-01)
POLISH\
PORTUGUE\
ROMANIAN\ (option 41 – ID 530 184-01)
RUSSIAN\
SLOVAK\ (option 41 – ID 530 184-01)
SLOVENIAN\ (option 41 – ID 530 184-01)
SPANISH\
SWEDISH\
TURKISH\ (option 41 – ID 530 184-01)
With MP7230.1–3, switch to the desired language.
You can store PLC dialog message files, PLC error message files, and help
files with identical file names in the different languages and in UNICODE (e.g.
with PLCtext V3.1):
In the system file OEM.SYS, enter only the file names with the commands
PLCDIALOG = and PLCERROR =. The NC looks for the paths given in MP7230.1
or MP7230.2. The entry behind MODEHELP = is overwritten with the selected
path whenever MP7230.3 is changed.
If texts from these files are also used in the PLC window, they must use
UTF8-coding.
To Next Page
Loading...
