July 2013 2.6 Brief description 129
Axis feedback control
Velocity feedforward control / Operation with following
error
Connection of the CC or UEC controller unit for digital axis
control over HSCI
Analog axis control over SPI expansion module
Cycle time for path interpolation 3 ms
Options
Additional control loops or software options can be
enabled by entering a code number.
Display
15- or 19-inch TFT color flat-panel display
Program memory
> 138 GB with HDR hard disk
> 21 GB solid state disk (SSD)
Input resolution and display step
Linear axes Linear axes down to 0.1 µm
Angular axes down to 0.0001°
Block processing time
0.5 ms
Real-time operating system
HeROS 5
Interpolation
Linear 5 of 18 axes
4 of 18 axes
a
Circle 2 of 18 axes
3 of 18 axes with tilted working plane
Helix Superimpositioning of circular and straight paths
Spline Cubic splines can be executed
Specifications iTNC 530 HSCI
To Next Page
Loading...
