1290 HEIDENHAIN Technical Manual iTNC 530 HSCI
INFO CTRL REG
AXIS xx STOP REF=yy
Position yyyy of axis xx at stop of movement
INFO MAIN ERRCLEARED Acknowledgment of an error message
INFO MAIN ERR_RECURED Error message entered several times
INFO MAIN ENDAT Entry for the position upon switch-on, if the switch-off
and switch-on positions of an EnDat encoder do not
match
INFO MAIN RUNPROC Status information about the current process
KEY Key strokes
INFO MAIN SOFTKEY Path with associated image file of a pressed soft key
STIB
a
ON Control-in-operation on
OFF Control-in-operation off
BLINK Control-in-operation symbol blinking
INFO MAIN START Type of control, NC software and valid Feature
Content Level (FCL)
INFO MAIN FILE DEL Faulty files on the hard disk, to be erased during
booting
INFO MAIN HDD Hard disk designation
INFO MAIN DSP ID number of the active controller software
INFO MAIN CYCLES Test results for fixed cycles and touch probe cycles
INFO MAIN KEYSOURCE Source of the keystrokes
KEYBOARD
PLC
PLCNCSTART
HANDWHEEL
LSV2
INFO MAIN KINEMATIC Listing of the definition tables with collision objects
that are monitored for collision with option 40, DCM.
a. Control-in-operation symbol = " * " in the screen display
Entry Description
To Next Page
Loading...
