HEIDENHAIN iTNC 530 HSCI - X, Y, Z, Etc. (Axis)

1308 HEIDENHAIN Technical Manual iTNC 530 HSCI
X, Y, Z, etc. (axis)
Icon Icon Icon Function
X, Y, Z, etc. (axis)
Higher-level folder containing all axis components
Status
Speed Controller tab:
 Status information about various signals, see page 1311
Status
Position Controller tab:
 Status information about various signals, see page 1314
Status
PLC tab:
 Status information about various signals, see page 1315
Motor
ID Label, see page 1319 tab:
 Plug and Play: Whether the device is plug-and-play capable
 Device: Designation of the device
 Model: Designation of the device type
 Serial number: Serial number of the device
 ID number: HEIDENHAIN ID of the device
 Brake present: Whether the motor has a brake
Motor
Motor Data tab:
 Information about motor-specific data from the motor table
Motor
Result tab:
 Information about motor data derived from the motor table or from the
machine parameter file
• Motor constant [Nm/A]: Internal reference value that indicates the
ratio of torque to current (= torque constant).
• Voltage constant: Internal reference value that indicates the ratio of
no-load voltage to rated speed.
• Field angle [°]: Value converted to [°] for the corresponding entry
from the MP file (MP2256.x).