July 2013 8.1 Display and operation 1337
Screen saver In controls with HSCI, the screen saver is configured using the XFCE window
manager or through the screen saver settings in the taskbar at the bottom of
the screen:
Make the taskbar at the bottom of the screen visible by moving the mouse
pointer over it.
Press the green HEIDENHAIN button to open the JH menu.
Select the Settings menu item.
Select the Screen Saver menu item.
If a (new) error message occurs, the screen saver will be exited automatically.
If the NC start key and an NC start key that is simulated via LSV2 are pressed,
the screen saver is ended and the NC start executed immediately. Please note
that the PLC program must always ensure that, while the guard doors are
open, an NC start or axis motions can only be triggered if a permissive button
is pressed at the same time. All of the other keys only cancel the screen saver
the first time they are pressed, without executing the actual function.
The backlight of the screen can also be switched off together with the screen
saver. The necessary settings can be made in the screen saver settings in the
"Complex" tab. The option "Activate energy management" must be set.
Third
desktop
The third desktop can be used primarily for additional applications that are to
be displayed in addition to the actual control operating modes. With the
Windows key you can always switch to the third desktop. You can also use
the taskbar to switch to any of the desktops.
The NC start key is also effective on the third desktop (OEM screen) and is
transferred to the NC (start of an NC program, if required). Furthermore, the
ERR or HELP key opens the error list and/or help text window on the third
desktop.
To Next Page
Loading...
