July 2013 8.1 Display and operation 1339
The following connection types are available in the Add Connection menu
item. You can configure individual connections of the types listed there. The
programs listed below are preinstalled on the control for the individual
connection types:
Windows Terminal Service (RDP)
Displays the desktop of a remote Windows computer on the control.
Program: Rdesktop Client 1.7.0
VNC
Connection to an external computer (e.g. IPC 6341). Displays the desktop of
a remote Windows or Unix computer on the control.
Program: Realvnc VNCViewer 4.1.3
Switch-off/restart of a computer
Remote-controlled switch-off or reboot of a remote Windows© or Unix
computer.
Program: net from Samba 3.3.1
Web
Connection to an external HTTP server. Opens the Firefox browser. Shows
the websites of remote computers by indicating the URL (e.g. also web
interface for remote control of devices).
Program: Firefox 3.6.19
XDMCP
Connection to an external Unix computer via X session.
Program: Xnest from X.Org XServer 1.9.2
User-defined connection
The user's own applications or programs that should not be started using
the NC software, but with HeROS 5.
Note: RDP and Net Shutdown are embedded programs of the Windows-
Distribution (at least available since Windows XP).
The versions of these programs may change with future software releases,
when newer versions of the respective program packages are available. The
versions listed here are therefore meant as "at least version xxx".
When using the Remote Desktop Manager software option, please note the
following:
HEIDENHAIN only assures a functioning connection between HeROS 5 and
the IPC 6341 (VNC, RDP and Net Shutdown protocols).
HEIDENHAIN cannot guarantee the correct function of any other
combinations or connections to external devices.
If changes to preinstalled programs or data make service visits from
HEIDENHAIN necessary, the service costs will be invoiced.
To avoid loss of data or damage to an externally connected system, you
should configure this computer to be shut down automatically when the the
TNC is shut down.
To Next Page
Loading...
