July 2013 8.1 Display and operation 1345
HEIDENHAIN recommends using the VNC connection if a program requiring
graphics acceleration (e.g. programs to play movies) is installed on the external
computer. RDP does not support this.
With VNC, the screen of the external computer is mirrored directly. The active
desktop on the external computer is not locked automatically.
With a VNC connection it is also possible to completely shut down the external
computer via the Windows menu. As the computer cannot be rebooted over
a connection, it must actually be switched off and on again.
With the VNC connection, the screen resolution is not adjusted automatically
during mirroring. If the resolutions of the external computer and the control
desktop do not match, this can have the effect, for example, that a scrollbar
appears on the screen. HEIDENHAIN therefore recommends activating the
full-screen mode.
Details
Computer: Host name or IP address of the external
computer. In the recommended
configuration of the IPC 6341, it is the IP
address 198.168.254.3.
Password: The default password for connection to the
VNC server is "123". Please change this
password on the IPC and TNC during
commissioning.
Full-screen
mode
Show display of the external computer in
full-screen mode. Only useful, if the
resolution of the external computer
matches the resolution of the control
screen (BF).
User-defined
window size
Definition of the window size for the display
of the external computer or connection. As
a rule, the window size should correspond
to the resolution of the external computer
or connection, as long as it is lower than the
resolution of the control screen.
Permit further
connections
Also grant other VNC connections access
to the VNC server.
View only Display-only mode. The mouse and
keyboard inputs are not transferred to the
external connection or external computer.
Advanced options Advanced settings that are usually not
necessary. Only in consultation with
HEIDENHAIN.
Menu item Function
To Next Page
Loading...
