HEIDENHAIN iTNC 530 HSCI - Page 1348

1348 HEIDENHAIN Technical Manual iTNC 530 HSCI
Menu item Function
General General settings
Connection
name:
Name of the connection in the Remote
Desktop Manager
Restarting
after end of
connection
Restart a canceled connection:
 Always restart
Always restart if the connection ends
 Never restart
Never restart
 Always after an error
Restart if the connection ends due to an
error
 Ask after an error
Display a message and ask after an error.
Autostart Connection is established automatically
when the control boots
Add to
favorites
A connection icon is displayed in the task
bar.
 Double-click
Double-clicking the icon starts an inactive
connection and/or switches to the
desktop of this connection.
 Single click
Switches to the desktop of this
connection.
 Right click
Shows a menu in which the connection
can be established or canceled.
Move to the
following
workspace
Desktop on which the connection is to be
opened. Desktops 0 and 1 are reserved for
the NC software and should not be used for
other connections. The default setting is
desktop 3. Also the Windows key on the
keyboard unit automatically opens desktop
3.