July 2013 8.1 Display and operation 1353
Details
Command: Any program can be executed with the
command.
Start in the
terminal
window:
The command or program is started in a
terminal window. This can be necessary on
programs without a graphic user interface
to display the program outputs in the
terminal or to be able to make inputs via the
terminal.
Run during
logoff:
Starts the command or program with every
logoff from HeROS. The function is
effective every time the HeROS interface is
closed, which can also be done via the task
bar without completely shutting down the
control, for example.
Run during
restart:
Starts the command or program every time
HeROS is restarted.
Run during
switch-off:
Starts the command or program every time
HeROS is shut down.
Max. run time
(seconds):
Run-time restriction for the started
program. When the specified time has
expired, the Remote Desktop Manager
terminates the program automatically.
0 = No run-time restriction
Run as another
user
The command or program is started with a
different user. By default, all programs are
started as "TNC" user. This user has only
limited rights, e.g. no access to the PLC:. If
"Run as another user" is set, any defined
user can be selected. In addition to this, the
user password must be entered.
Additional options Advanced settings that are usually not
necessary. Only in consultation with
HEIDENHAIN.
Menu item Function
To Next Page
Loading...
