HEIDENHAIN iTNC 530 HSCI - Page 1361

July 2013 8.2 PLC window 1361
Settings for RS-232
RS232.FEBAUD string Baud rate FE on RS-232
RS232.EXT1BAUD string Baud rate EXT1 on RS-232
RS232.EXT1BAUD string Baud rate EXT2 on RS-232
RS232.LSV2BAUD string Baud rate LSV2 on RS-232
RS232.MODE string RS-232 mode
Settings for simulation
SIMU.ENAPRESET string Preset enable
SIMU.ENALIMIT string Limit switch enable
SIMU.LIMITPL[5] double Positive limit switch
SIMU.LIMITMI[5] double Negative limit switch
SIMU.PRESET[5] double Preset values
Settings of the machine
MACHINE.LIMIT1PL[5] double Pos. limit switch group 1
MACHINE.LIMIT1MI[5] double Neg. limit switch group 1
MACHINE.LIMIT2PL[5] double Pos. limit switch group 2
MACHINE.LIMIT2MI[5] double Neg. limit switch group 2
MACHINE.LIMIT3PL[5] double Pos. limit switch group 3
MACHINE.LIMIT3MI[5] double Neg. limit switch group 3
MACHINE.PRESET1[5] double Preset values 1
MACHINE.PRESET2[5] double Preset values 2
MACHINE.PRESET3[5] double Preset values 3
MACHINE.POSINC[5] double
MACHINE.DRVOFFSET[5] double
MACHINE.HANDW_FACTOR[5] double Handwheel subdivision factor