HEIDENHAIN iTNC 530 HSCI - Page 1364

1364 HEIDENHAIN Technical Manual iTNC 530 HSCI
CPOS=column, line
Writes the next text or graphic at the designated position. The width of a
column is calculated from the current character set. The height of a line is
preset and can be changed with LINEDIST.
line = Line on the current page
column = Column from the left edge of the window
ICPOS=column, line
Writes the next text or graphic at a position offset from the present position
by the specified number of lines and columns. The width of a column is
calculated from the current character set. The height of a line is preset and can
be changed with LINEDIST.
line = Distance in lines from the old line
column = Distance in spaces from the old space
LINEDIST=ypix Defines the line spacing. The default setting depends on the
character size and is reset with every call of CHARSIZE.
COLOR=[f] or COLOUR=[f]
Sets the foreground color. Value range for f: 1 to 15
Default setting: Color 11
The colors are defined in MP7367.
(see "Color settings" on page 1267)
CURSOR=ON/OFF
Switches the inversion (highlighting) on and off.
Default setting: OFF
CHARSIZE=SMALL/MEDIUM/LARGE/AUTO
Defines the character size.
Split screen: SMALL
Large PLC window: MEDIUM
AUTO: Character size depends on the window size.
Default setting: AUTO
With every call of CHARSIZE, the value of LINEDIST is overwritten by a default
setting that depends on the character set.
Default spacings:
Line Column
SMALL 168 pixels
MEDIUM 2416 pixels
LARGE 4832 pixels