HEIDENHAIN iTNC 530 HSCI - Files; Disable Soft Keys for File Types; Disabling File Types for Editing

1406 HEIDENHAIN Technical Manual iTNC 530 HSCI
8.5 Files
The iTNC enables you to edit various file types. File types are identified by an
extension after the file name.
Disable soft keys for
file types
With the SELECT TYPE soft key you can display a soft key for each file type:
 Select MP7224.0 to disable soft keys of specific file types.
Disabling file types
for editing
Protected files cannot be edited or changed. They are displayed in the file
overview with the color defined in MP7354.1 or MP7355.1, and if the
EDIT ON OFF soft key is pressed, the Protected file! error message
appears:
 Choose with MP7224.1 the file type that you want to protect.
 Choose with MP7224.2 the file type whose EDIT ON OFF soft key is to be
disabled.
MP7224 Lock specific file types
Input: Bit 0 – HEIDENHAIN programs *.H
Bit 1 – ISO programs *.I
Bit 2 – Tool tables *.T
Bit 3 – Datum tables *.D
Bit 4 – Pallet tables *.P
Bit 5 – Text files *.A
Bit 6 – Reserved
Bit 7 – Point tables *.PNT
0: Do not disable
1: Disable
MP7224.0 Disable soft keys for file types
MP7224.1 Protect file types
MP7224.2 Disable the EDIT ON/OFF soft key
You can also set access levels with PLC Module 9285 to protect file types
from being edited, see page 1168.