July 2013 2.7 Software 143
General Key:
The general key permits you to enable and test all new feature content level
functions and software options. The general key is valid for 90 days after the
first enabling. After these 90 days have expired, the general key can only be
used again after the software version on your control has been updated.
Display Meaning
Status NONE General key was not used yet for
this software version.
dd.mm.yyyy Date up to which all options will
be available. It is not possible to
enable them again after this
date.
EXPIRED General key has expired for this
software version. Enabling is not
possible.
Set Pressing the Set button or the SET GENERAL KEY soft
key opens a window in which you press the Apply
button or the SET GENERAL KEY button again to enable
all options for 90 days.
If this is done successfully, the General key has been
set message appears and the expiration date of the
general key is shown in the State field.
Expire Pressing the Expire button or the EXPIRE GENERAL KEY
soft key opens a window in which you press the Apply
button or the EXPIRE GENERAL KEY button again to
expire the general key immediately.
Be aware that it is then no longer possible to enable
the general key for this software version!
To Next Page
Loading...
