HEIDENHAIN iTNC 530 HSCI - Feature Content Level (FCL)

144 HEIDENHAIN Technical Manual iTNC 530 HSCI
Feature Content Level (FCL):
Danger
If you reduce the feature content level, then all new FCL functions and
enhanced functions will be set to the desired lower version. Only error fixes
remain active. This action can only be reversed by entering a valid code
number again.
Display Meaning
Actual Value Current version of the feature content level
Installed Software
Supports
Highest possible FCL with the current software
Set Pressing the Set button or the SET FCL soft key
opens a window in which you can enter the code
number for the desired feature content level
under Enter Key Code. HEIDENHAIN can give
you the code number after you state your SIK
number.
Then press the Set FCL button or the SET FCL soft
key to confirm the entry. If this is done
successfully, the message
Feature Content Level has been set appears.
Reduce Pressing the Reduce button or the REDUCE FCL soft
key opens a window in which you can enter the
desired lower feature content level under
New (lower) FCL.
Please note that this action can only be reversed
by entering a valid code number again.
If you really want to reduce the feature content
level, then press the Apply button or the
REDUCE FCL soft key to confirm the entry. If this is
done successfully, the message
Feature Content Level has been
reduced appears.