July 2013 8.8 Electronic handwheel 1523
Information in the
handwheel
configuration
dialog
The general procedure for the configuration of the HR 550FS handwheel is
described in the iTNC 530 User's Manual.
To access the handwheel configuration dialog, proceed as follows:
Press the MOD key
Scroll through the soft-key row
Press the SET UP WIRELESS HANDWHEEL soft key
HEIDENHAIN generally recommends that in Channel setting you manually
define the radio channel to be used. To select a vacant radio channel, please
follow the information provided in this document. We advise against using the
Best channel setting because it does not allow planning for the radio
environment, and therefore unexpected disturbances during the operation of
the wireless handwheel system may occur.
To Next Page
Loading...
