July 2013 8.13 Touch probe 1547
Variable names:
Time management
Name Format type Description
HOUR int No. of hours from real-time clock
MIN int No. of minutes from real-time clock
SEC int No. of seconds from real-time clock
DAY int Day from real-time clock
MONTH int Month as no. from real-time clock
STR_MONTH string Month as string abbr. from real-time clock
YEAR2 int Two-digit year no. from real-time clock
YEAR4 int Four-digit year from the real-time clock
Settings of the manual measuring cycles
Name Format type Description
TCH.AXIS string Selected probe axis
TCH.PLANEROT double Basic rotation angle
TS.RAD double Calibrated probe radius
TS.LEN double Calibrated stylus length
TS.OFF1 double Calibrated center offset in reference axis
TS.OFF2 double Calibrated center offset in minor axis
TS.RINGRAD double Radius of calibration ring
Results or input from the manual measuring cycles
Name Format type Description
BZ double Reference point
BEZA string String reference point axis
Reference point at corner, circle, 4 holes, 3 holes on a circle
Name Format type Description
BZ_HA double Reference point in reference axis
BZ_NA double Reference point in minor axis
LKALBEZ double Reference point entered with calibrated probe length
HA string Reference-axis character
NA string Minor-axis character
TA string Probe axis character
Calculated straight lines from straight-line probing
Name Format type Description
GE_HA[2] double Straight-line axis section of reference axis
GE_NA[2] double Straight-line axis section of minor axis
GE_WI[2] double Straight-line angle
To Next Page
Loading...
