HEIDENHAIN iTNC 530 HSCI - Page 1548

1548 HEIDENHAIN Technical Manual iTNC 530 HSCI
Example "Touch probe calibration";
„___________________“;
%02.2d-%02.2d-%4d:%02.2d:%02.2d "Time",DAY,MONTH,YEAR4,HOUR,MIN,SEC;
Probe axis:"%s",TA;
Probe radius: "%4.3lf" TS.RAD;
Probe length: "%4.3lf" TS.LEN;
Ring radius: "%4.3lf",TS.RINGRAD;
Center offset in reference axis: "%4.3lf" TS.OFF1;
Center offset in minor axis: "%4.3lf" TS.OFF2;
Calculated radii from circle probing
Name Format type Description
RAD[8] double 8 radii
Calculated center points from circle probing
Name Format type Description
MP_HA[8] double Reference axis of center points
MP_NA[8] double Minor axis of center points
Accumulated touch points from probes
Name Format
type
Description
AP_HA[32] double Touch points in reference axis
AP_NA[32] double Touch points in minor axis
AP_TA[32] double Touch points in probe axis