HEIDENHAIN iTNC 530 HSCI - Page 1569

July 2013 8.15 Tool changer 1569
MP7266.24 Tool type
 BOR: Boring tool
 BCKBOR: Back-boring tool
 CENT: NC spot drill / center
drill
 CSINK: Countersinking tool
 DRILL: Drilling tool
 MILL: Milling cutter
 MILL_R: Rough cutter
 MILL_F: Finishing cutter
 MILL_RF: Rough and finishing
cutter
 MILL_FD: Floor finishing cutter
 MILL_FS: Side finishing cutter
 MILL_FACE: Face-milling
cutter
 REAM: Reamer
 TAP: Tapping tool
 GF: Thread miller
 GSF: Thread miller with
chamfer
 EP: Thread miller for single
threads
 WSP: Thread miller with
indexable insert
 BGF: Thriller
 ZBGF: Circular thread miller
 TSINK: Piloted counterbore
TYPE 10 characters 10 STRING
MP Meaning Column
name
Value range Column
width
Data type