HEIDENHAIN iTNC 530 HSCI - FCL Level

166 HEIDENHAIN Technical Manual iTNC 530 HSCI
FCL level This table shows which FCL is available with which software version.
FCL Functions of the FCL Available as of
software version:
FCL 2 Conversational programming functions:
 Cycle 441: Global touch-probe parameters
 CAD point filter (offline)
 3-D line graphics
 Virtual tool axis
 In the active tool-axis system
smarT.NC functions:
 Coordinate transformation: Units 7, 8, 10,
11
 PLANE function: Unit 140, Tilting the
Working Plane
 Contour-pocket with variable depth
 Graphic block scan
General:
 Expanded USB functionality
 Network connection over DHCP and DNS
60642x-01
FCL 3 The TNCguide FCL function and Asian
languages require at least 256 MB RAM
 TNCguide, context-sensitive help system
(user documentation)
 KinematicsOpt requires FCL 3
smarT.NC functions:
 Feed-rate reduction during contour pocket
machining
 Units 408, 409 for datum setting
 Unit 130 contour pocket on point pattern
 Parallel programming
 Behavior between two machining points
Conversational programming functions:
 Feed-rate reduction during contour pocket
machining
Touch probe functions:
 Probe Units 408, 409 for datum setting
 3-D Probe Cycle 4
60642x-01
FCL 4  DCM for handwheel superimposition
 DCM: Graphic simulation of the protected
space or of collision objects
 3-D basic rotation light
60642x-01